仍旧检修adp-185, 故障无12v,先检查pfc 330. 按例挂ncp1605bg 16脚hv 波形如下: 按ncp1605bg data sheet NCP1605 - Power Factor Controller, Enhanced, High Voltage and Efficient Standby Mode 能触发保护的大致上只有14脚ovp/uvp ,pfc 330一般uvp/ovp都是小于2。0的 再检查13脚stdwn,按data sheet,大于2。5v即触发保护 vcc低于VccRST 4.0之后再 重新reset. 这次截了hv的波形,忘记把stdwn和vcc一并截图了,只能待下次了。 修法仍旧是校正 themal resistor 4704 0.1% x3.